ODT 1510 - LYNX Technik
Categoria: Fibra Ótica
Prazo de entrega: Consulte-nos
The ODT 1510 is a multi-function module which (when used with another ODT 1510 in the remote location) will extend the reach of serial RS232, RS422 or RS485 as well as two GPI (general purpose I/O) up to 10km (6.2 miles) over fiber.
A single RJ45 electrical serial connection can be configured for RS232,RS422 or RS485 serial standards. A separate RJ45 connector is provided for two electrical GPI inputs and outputs. Serial communications and GPI are transmitted and extended over the same fiber link.
The ODT 1510 is completely agnostic to the serial protocol used, and supports all standard protocols and proprietary protocols at data rates from 300 to 460K Baud (auto sensing and auto adjusting).
The integrated dip switch provides precise control over the serial mode of operation with selections for the serial standard, serial termination, RX/TX crossover and RS422/485 data direction (automatic or manual). Data activity LEDs are provided for the serial port and the GPI port under the respective RJ45 connectors.
The ODT 1510 also supports mixing and matching of serial standards. For example: the transmitting module can have a RS232 input, and the receiving module can be set for RS422 output.
The ODT 1510 is 100% plug and play, hot pluggable and no special software drivers are required.
Extend serial and GPI connections up to 10km
Supports serial RS232 or RS422 or RS485
2 x GPI connections
Singlemode fiber 1310nm up to 10km (6.2 miles)
LC/PC duplex fiber connections
Switchable RX/TX crossover
Automatic or manual data direction
Switchable end of line termination
‘Plug and Play’ - No PC software drivers needed
Supports all serial protocols (standard or proprietary)
300 - 460K Baud (auto sensing and auto adjusting)